make music fun - midi lfos for the op-1 field, tx-6 and tp-7 by teenage engineering
get it on the app store — iphone & ipad
full notes on github.
m target), about 17 parameters per channelgain 1–3 belong to the three input jacks, not to tracks. record is deliberately not an lfo targetthe app picks your device from its midi name, or choose it yourself in settings if you connect through a hub. one device at a time.
op1 (beat match) / tx6 / tp7 — the device is master. the app's lfos follow its tempo.app (midi sync) — the app is master. it controls basic transport (play/stop, plus back/forward on the op-1 and tp-7, or the −/+ tempo buttons on the tx-6).
tempo lfo on the op-1 requires a usb-c connection.toggle the app's tempo mode by tapping the metronome, then change the device to match.
midi sync mode is needed for tape transport from the app.midi control to in. until you do, the tx-6 ignores everything the app sends (and stops sending its own knob and fader messages).clock SRC to match how you are connected: usb over usb-c, ble over bluetooth. with the wrong one, tempo and play/stop silently do nothing while volume, pan and mute still work.clock SRC to internal, enable clock out, and tap the metronome until it reads tx6.sync mode for the app to follow the tp-7's tempo. it only streams midi clock while its tape is moving. volume, mute and gain control work in off and sync alike.ctrl mode the tp-7 acts as a controller for other gear: it will not play back and stops receiving commands from the app.every device lfo hero supports — the op-1 field, tx-6 and tp-7 — was mapped by measuring real hardware, because the published midi references turned out to be wrong in several places. adding the op-1 (original), op-z, ep-133, ob-4 or a po means someone who owns one has to record what it actually sends.
it takes about ten minutes and you don't need to know anything about midi: